Kramer Electronics VS-88HD - Manual (Page 27)

Operating the VS-88HD
23
23
7.1.10 Indicating Errors
If the front panel buttons were incorrectly pressed, such as pressing two
keys at once, or an invalid setup # was chosen for recall, the following error
indication occurs:
• The STO, RCL, LOCK, and TAKE buttons all flash together for
one second and return to their previous state
If an error is indicated, retry the previous action or choose a new action.
7.2 Using Serial Commands
To operate the VS-88HD using serial commands, Kramer offers control
software that can do this. You can download free software from the Kramer
Electronics Web site.
• For an explanation of all KRAMER 3000 commands, see section
10.2
• For an explanation of all KRAMER 2000 commands, see section
12
7.3 Using the Infrared Remote Controller
To operate the VS-88HD using the RC-IR3 infrared remote controller, see
the User Manual packed with the remote controller
1
Note:
.
• The remote control cannot set single or dual mode operation or
change genlock timing. They can only be set from the front panel
• The IR remote can only set 8 preset configurations equivalent to
OUT1 to OUT8
1 See also the Kramer Web site: www.kramerelectronics.com