Kramer Electronics VS-88HD - Manual (Page 25)

Operating the VS-88HD
21
21
1. Press an OUT SELECT button
1
2. Press an IN SELECT button
or the ALL button.
The 7-segment display flashes.
1
or the OFF button
2
7.1.4 Toggling Between Modes
.
The selected input switches to the selected output. The digits displayed in
the 7-segment display change as appropriate.
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the TAKE button to toggle from the AT ONCE mode (in which the
TAKE button is not lit) to the CONFIRM mode (in which the TAKE button
illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the CONFIRM mode
back to the AT ONCE mode.
TAKE button turns off and actions no longer require user confirmation.
7.1.5 Switching in the CONFIRM Mode
To switch in the CONFIRM mode, when the TAKE button is illuminated,
do the following:
1. Press an OUT-IN combination.
The 7-segment display flashes
3
2. Press the TAKE button to confirm the action.
The 7-segment display stops flashing. The TAKE button stays lit.
.
To confirm several actions (in CONFIRM mode), do the following:
1. Press each OUT-IN combination in sequence.
The 7-segment display flashes.
2. Press the TAKE button to confirm all the actions.
The 7-segment display stops flashing. The TAKE button stays lit.
7.1.6 Storing an Input/Output Configuration
You can store up to 16 configurations in memory and recall them as presets
using the eight IN SELECT buttons and the eight OUT SELECT buttons.
To store the current configuration, do the following:
1 From 1 to 8
2 For immediate switching
3 The timeout lasts for 10 seconds