Kramer Electronics VS-808TP - Manual (Page 23)

VS-808TP - Operating the VS-808TP Remotely via the Web Pages
19
8 Operating the VS-808TP Remotely via the
Web Pages
You can operate the VS-808TP using a standard Web browser over a LAN. The
Web pages are divided into four sections:
•
Connections—Controls switching, video gain and compensation, and audio
volume (see Section 8.2 )
•
Setup—Controls Web, serial, port names, and data and audio processing
(see Section 8.3 )
•
User Management—Controls user administration (see Section 8.4 )
•
Firmware—Updating the firmware of the device (see Section 8.5 )
8.1 Accessing the VS-808TP Web Pages
To access the VS-808TP Web pages:
1. Open your Internet browser.
2. Enter the IP address of the device (see Section 10 ) in the address bar of
your browser (see Figure 13 ).
Figure 13: Web Browser Address Bar
For the default logon credentials see Section 10.2 . We recommend for security
reasons that you change the defaults at first logon.
The main switching control Connections page is displayed which shows a
graphical interpretation of the front panel (see Figure 14 ).
After making changes on any of the pages click:
•
Submit to save the changes
•
Clear to abandon the changes
•
Default Setting (if available) to load the default parameters for the page