Kramer Electronics VS-808TP - Manual (Page 16)

12
VS-808TP - Connecting the VS-808TP
Figure 9: Internet Protocol (TCP/IP) Properties Window
7. Click OK.
6.3.2 Connecting to the Ethernet Port via a Network Switch/Hub
To connect to the Ethernet port on the VS-808TP via a network switch/hub:
•
Connect the PC to the Ethernet network switch/hub using a straight through
cable
6.4 Connecting the Balanced/Unbalanced Stereo Audio
Output
This section illustrates how to wire the devices to the balanced audio output:
•
A balanced stereo output connection, see Figure 10
•
An unbalanced stereo output connection, see Figure 11