Kramer Electronics VS-808TP - Manual (Page 12)

8
VS-808TP - Connecting the VS-808TP

An audio source (for example, the audio output of a laptop) to the
Audio In 3.5mm mini jack
2. For a local video and audio acceptor connect:
 The PC Out 15-pin HD (F) connector to the video input of the acceptor
(for example, an AV system)
 The Audio Out 3.5mm audio jack to the audio input of the acceptor
3. For remote inputs and outputs:

Connect up to eight compatible TP transmitters (for example,
TP-133/TP-125) to the TP INPUTS 1 to 8
 Connect up to eight compatible TP receivers (for example,
TP-134/TP-126) to the TP OUTPUTS 1 to 8
Note: The TP-134 transmitter can be paired only with a TP-134 receiver, and the
TP-125 transmitter can be paired only with a TP-126 receiver. Do not use both the
TP-133/TP-134 and TP-125/TP-126 in the same system as depending on the
switcher setup only one will work.
6.1 Connecting a Serial Data Source to the VS-808TP RS-232
Data Port
You can connect a serial data source to the VS-808TP via RS-232 to control
remote acceptors (for example, monitors).
The RS-232 data source is connected to the RS-232 (DATA) port. A null-modem
adapter is not required for this connection and a straight-through cable can be
used.
6.2 Connecting a Serial Controller to the VS-808TP
You can control the VS-808TP via one of three types of serial connections:
•
RS-232
•
RS-485
•
RS-422