3 upgrading firmware, Upgrading firmware, Figure 23: splash screen – Kramer Electronics VS-3232A User Manual

Page 51: Figure 24: atmel – flip window

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Flash Memory Upgrade

10.1.3 Upgrading Firmware

Follow these steps to upgrade the firmware:

1. Double click the desktop icon: “Shortcut to FLIP.EXE”.

The Splash screen appears as follows:

Figure 23: Splash Screen

2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip”

window:

Figure 24: Atmel – Flip Window

3. Press the keyboard shortcut key F2 (or select the “Select” command from

the Device menu, or press the integrated circuit icon in the upper right corner
of the window).
The “Device Selection” window appears: