Kramer Electronics VP-31 - Manual (Page 8)

VGA/XGA/AUDIO SWITCHERS
This section describes all the controls and connections of your switcher. Understanding them helps you realize
the full power of your switcher.
Getting to Know Your VP-31 Switcher
The KRAMER VP-31 is a full bandwidth, 3x1 VGA/XGA Switcher designed for computer and workstation
applications. The VP-31 switches one of three VGA/Super-VGA/XGA graphics card outputs to one monitor or
vice versa, with no discernible signal degradation. Input and output are directly coupled and conform to the
highest standards. Signal bandwidth of over 450MHz allows the VP-31 to be used with the highest resolution
graphics workstations. Front/Rear panel features of the VP-31 are described in Figure 1 and Table 1.
NOTE
For operation instructions refer to section 9.
Figure 1: VP-31 Front/Rear Panel Features
Table 1: VP-31 Front/Rear Panel Features
No. Feature Function
1. Illuminated power switch Supplies power to the unit.
2. INPUT SELECTOR switches (A, B, C) Select the desired input to be switched to the output.
3. INPUT (A-C) HD 15F Connectors VGA/XGA video input
4. OUTPUT HD 15F Connector Video output.
5. Power connector
A 3-prong AC connector allows power to be supplied to
the unit. Directly underneath this connector, a fuse
holder houses the appropriate fuse.