Kramer Electronics VP-31 - Manual (Page 18)

7) If properly connected and with the right COM port selected, you can identify your switcher and view an
image representing its control panel on the PC monitor (with the current configuration).
8) If the COM or switcher are not properly selected, " Communication Error" message appears.
9) To exit the program, click the " Exit" button. You are prompted for confirmation.
NOTE
When clicking " Exit", the program automatically
stores the active port number and your switcher ID.
When the program is run again, this port and
switcher ID automatically appear.
TAKING CARE OF YOUR SWITCHER
Do not locate your switcher in an environment where it is susceptible to dust or moisture. Both of these may
damage the electronics, and cause erratic operation or failure. Do not locate your switcher where temperature
and humidity may be excessive. Doing so may also damage the electronics, and cause erratic operation or
failure of your switcher. Do not clean your switcher with abrasives or strong cleaners. Doing so may remove
or damage the finish, or may allow moisture to build up. Take care not to allow dust or particles to build up
inside unused or open connectors.