Argus Camera DC3810 - Manual (Page 29)

29
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
Be sure the camera is off when inserting or removing the CF card. If the power is left on while
performing this function, data in the card may be lost or the card itself damaged. Should you
inadvertently perform this function while the camera is on, save the data on the card to your PC
if it's safe then re-format the data card.
INSERTING THE CF CARD
1 Open the card-slot door.
2 Insert the CF card into the card slot.
•
Position the flat edge side of card toward the camera lens with the signal
part facing down ward. Push card into slot making sure to slide it straight
and not at an angle. Push the card in until it stops.
• If the card stops halfway, check the direction of the card. Forcing the
card into the slot could damage both card and camera.