Argus Camera DC3810 User Manual

Page 153

153

Solution

Rotate the function dial to and slide the power
switch to turn on the camera.
Replace all four batteries or use the AC adapter
( sold separately ).
Remove the batteries and then insert the batteries by
following the +/- diagram indicated in front of the bat-
tery-chamber door.
When "NO CARD" is displayed on the LCD monitor and
"CF" is displayed on the data panel, the CF card is not
installed. Install the CF card.
Slide the power switch to

turn on the camera.

The camera

is busy reading the image data from the

CF card. Simply wait until this function is complete
and "PLAY BACK" stops blinking on the LCD monitor.

Retake the photo within the flash range ( 0.4 to 3 m ) .

Problem

The image
will not play
back on
the LCD
monitor.

The

image

recorded in
the flash
mode is
dark.

ause

Camera is shut off.

Batteries are exhausted.

Batteries are inserted with the
polarity reversed.

The CF card is not inserted into
the camera.

The auto power-off function has
timed out and shut off the camera.
The green focus lamp blinks
slowly

and "PLAYBACK" blinks

on the LCD monitor.

Subject is out of the flash
range.

Page