Argus Camera DC3810 - Manual (Page 125)

125
1 With the camera turned on, rotate the function dial to "SETUP".
SWITCHING THE VIDEO SIGNAL FROM THE VIDEO OUTPUT TERMINAL
The Argus DC3810 camera has a video-out terminal to view captured images on your TV set with the
video cable that came with your DC3810. You can switch the camera's output signal between NTSC
and PAL .
What is NTSC and PAL?
Both are the TV's broadcast system. The NTSC system is mainly used in the U.S.A., Japan, Canada,
Mexico, the Philippines and Korea. The PAL system is used in the western Europe such as Germany, England,
Switzerland, Holland, Italy (except for France) and Australia, Singapore, Thailand and China.
As these systems have no compatibility, you cannot watch an NTSC system based TV in an area where a PAL
system is used.
This camera can switch the video output signal to both an NTSC system and a PAL system
so you can watch the
images on TV not only in your own country, but around the world.
2 Press or to highlight [VIDEO OUT].
Press once.