Graymills Liftkleen L-Series OMI - Manual (Page 15)

14
TABLE 4
LIFTKLEEN ELECTRICAL CURRENT REQUIREMENTS
HEATER AMPERAGE
VOLTAGE/PHASE 1 Heater (4500 W) 2 Heaters (9000 W) 3 Heaters (13,500 W)
240 V/1-Ph 18.8 37.5 56.3
240 V/3-Ph 10.8 21.7 32.5
480 V/3-Ph 5.4 10.8 16.2
575 V/3-Ph 4.5 9.0 13.5
Note: Add the corresponding motor amps below to the above heater amps to find the full load amperage.
VOLTAGE/PHASE MOTOR AMPERAGE (1-1/2 H.P., 1725 RPM)
230 V/1-Ph 10.5
230 V/3-Ph 4.6
460 V/3-Ph 2.3
575 V/3-Ph 2.0
TABLE 5
LIFTKLEEN FILTERS
Filter Housing #742-06154 is used with the following cartridge assemblies.
Cartridge Particle Retention Element
Cartridge # Type Size Number
742-06317 Stacked Disc 3-5 Micron 742-06318
742-06319 Disposable Bag 50 Micron 742-06320
742-06332 Strainer 590 Micron (30 Mesh) 742-06331
742-06243 Strainer 150 Micron (100 Mesh) 742-06244
_ Strainer* 100 Micron (150 Mesh) 742-06379
_ Strainer* 74 Micron (200 Mesh) 742-06380
_ Strainer * 30 Micron (2140 Mesh) 742-06381
*These are optional elements (not cartridge assemblies). They can be used in place of the standard
elements (30 Mesh and 100 Mesh) in cartridge assemblies #742-06332 and 742-06243.