Rugged Ridge XHD Low/High Mount Snorkel System, 07-11 Jeep Wrangler (JK) User Manual
Page 7
Page 7 of 23 REV.1 06/25/2012
Snorkel Installation Instructions: 2007-2011 Wrangler 2DR & 4DR Unlimited
P/N: 17756.06 - Low Mount XHD Modular Snorkel System
34
- Test fit fender gasket as
shown. Gasket should
rest flat onto fender. If
gasket does not fit flat
around cut opening trim
inner antenna bracket as
needed.
35
- With gasket in place test
fit main body of snorkle
into cut section as shown.
Trim fender as needed.
Avoid getting to close to
the outer edge of fender.
Trimming too far will result
in a visible gap (arrow) .
36
- Use 100 grit sand paper or
sanding block to smooth
rough cut metal.
37
- With opening trimmed
to correct size and edges
smoothed apply a
protective coat of paint.
Matching touch up paint
is recommended. Clear
coat can also be used.
38
- Apply a very small amount
of super glue to inner
corners of fender gasket.
It will be easier to start at
on end and work around
opening. Applying glue
as needed. This will insure
gasket remains in place
during reasembly.
39
- Trim extra gasket as
needed.
- HD Steering Box Mount, 76-86 Jeep CJ Models (4 pages)
- Manual Locking Hub Set, 86.5-93 Nissan Frontier, Pathfinder, & Xterras (1 page)
- Manual Locking Hub Conversion Kit, 90-97 Ford, Mazda SUV & Pickup (2 pages)
- AMC20 Heavy Duty Differential Cover (1 page)
- Dana 44 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 30 (1 page)
- Differential Skid Plate, Dana 44 (1 page)
- Heavy Duty Steering Box Brace, 84-01 Jeep Cherokee (XJ) (3 pages)
- Differential Skid Plate, Jeep logo, Dana 44 (1 page)
- Dana 30 Heavy Duty Differential Cover (1 page)
- Dana 35 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 35 (1 page)
- Manual Locking Hub Set, 86-93 Nissan Pathfinder & Pickup (1 page)
- Manual Locking Hub Set, 90-94 Nissan Patrol (1 page)
- Heavy Duty Steering Box Brace, 76-86 Jeep CJ Models (3 pages)
- Differential Skid Plate, Jeep logo, Dana 30 (1 page)
- Dana 60 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Jeep logo, Dana 35 (1 page)
- Tail Light Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- Headlight Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- Euro Style Turn Signal & Side Marker Guard,07-14 Jeep Wrangler (JK) (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler (JK) (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- 3-Inch Round Tube Steps, Black, 07-14 Jeep Wrangler Unlimited (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Wrangler Unlimited (JK) (2 pages)
- Steering Component Skid Plate, 07-14 Jeep Wrangler (JK) (2 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Rocker Side Panels, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Front Fender Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 4-Door Wrangler (JK) (2 pages)
- Hood Guard, Body Armor, 07-14 Jeep Wrangler (1 page)
- Tail Light Euro Guards, 07-14 Jeep Wrangler (JK) (3 pages)
- Euro Guard, Turn Signal, Black, 07-14 Jeep Wrangler (1 page)
- RRC Side Armor Guards, 87-06 Jeep Wrangler (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler (JK) (1 page)
- 3-Inch Round Side Steps, Black, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Jeep Wrangler (JK) (2 pages)
- 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) (10 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- Side Marker Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- Fog Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- 3-Inch Round Tube Side Steps, Black, 97-06 Jeep Wrangler (TJ) (2 pages)
- Gas Tank Skid Plate, 97-06 Jeep Wrangler (TJ) (3 pages)