beautypg.com

Rugged Ridge XHD Low/High Mount Snorkel System, 07-11 Jeep Wrangler (JK) User Manual

Page 12

background image

Page 12 of 23 REV.1 06/25/2012

Snorkel Installation Instructions: 2007-2011 Wrangler 2DR & 4DR Unlimited

P/N: 17756.06 - Low Mount XHD Modular Snorkel System

65

- Apply extra sealant to top

of grommets.

64

- Remove top rubber

grommet from air box

mounting plate (arrow).

Apply sealant to the

inside of two lower rubber

grommets as shown. Make

sure sealant completely

fills the two holes.

66

- Apply sealant to

coresponding holes on

the underside of inner

fender mounting plate.

67

- Place new air box

down onto elbow

and align mounting

holes with rubber

grommets.

68

- Press air box fully onto

elbow and slide 3” clamp

into place. Clamp should

be pushed all the way to

the top towards lower

air box (arrow).

69

- Tighten 3” clamp to air box.

Make sure clamp is slid

over inlet of lower air box

and just under the bottom

of box. Clean away extra

sealant.