Apple AirPort Networks User Manual
Page 58
58
Chapter 3
AirPort Network Designs
 Make sure that the computer has joined the AirPort network created by your wireless
device.
 Restart your computer. This renews the IP address you receive from the wireless
device. The IP addresses should be in the range of 10.0.1.2 to 10.0.1.200, 172.16.1.2 to
172.16.1.200, or 192.168.1.2 to 192.168.1.200 depending on the address scheme the
device uses.
 If the device is set up as a DHCP server, make sure the “Obtain an IP address
automatically” checkbox is selected in the General pane of Internet Protocol (TCP/IP)
Properties. Right-click the wireless connection icon and click Properties. Click Internet
Protocol (TCP/IP), and then click Properties.
More Information About AirPort
You can find more information about AirPort in the following locations:
 AirPort Utility Help
Look in AirPort Utility Help for information on setting up an AirPort Extreme network;
using an AirPort Extreme Base Station, an AirPort Express, or a Time Capsule; editing
settings; avoiding sources of interference; locating additional information on the
Internet; and more. On a computer using Mac OS X, open AirPort Utility and choose
Help > AirPort Utility Help. On a computer using Windows, open AirPort Utility and
click Help.
 World Wide Web
Apple AirPort website at www.apple.com/airportextreme
Apple Support website at www.apple.com/support/airport