Goulds Pumps 3910 11th ed. - IOM - Manual (Page 2)

FOREWORD
This manual provides instructions for the Installation, Operation, and Maintenance of the Goulds
Model 3910 Vertical Bearing Frame In-line Process Pump designed to meet the requirements of
the
11th Edition (ISO 13709) of API* Standard 610. This manual covers the standard product
plus common options that are available. For special options, supplemental instructions are
supplied. This manual must be read and understood before installation and maintenance.
The design, materials, and workmanship incorporated in the construction of Goulds pumps make them
capable of giving long, trouble-free service. The life and satisfactory service of any mechanical unit,
however, are enhanced and extended by correct application, proper installation, periodic inspection,
condition monitoring, and careful maintenance. This instruction manual was prepared to assist operators
in understanding the construction and the correct methods of installing, operating, and maintaining these
pumps.
ITT - Goulds Pumps shall not be liable for physical injury, damage or delays caused by a failure
to observe the instructions for installation, operation, and maintenance contained in this manual.
!
When pumping unit is installed in a potentially explosive atmosphere, the instructions after the Ex symbol must be
followed. Personal injury and/or equipment damage may occur if these instructions are not followed. If there is any
question regarding these requirements or if the equipment is to be modified, please contact a Goulds representative
before proceeding.
Warranty is valid only when genuine ITT - Goulds Pumps parts are used.
Use of the equipment on a service other than stated in the order will nullify the warranty, unless written
approval is obtained in advance from ITT - Goulds Pumps.
Supervision by an authorized ITT - Goulds representative is recommended to assure proper installation.
Additional manuals can be obtained by contacting your local ITT - Goulds representative or by calling
1-(800)-446-8537.
THIS MANUAL EXPLAINS
n Proper Installation
n Start-up Procedures
n Operation Procedures
n Routine Maintenance
n Pump Overhaul
n Troubleshooting
n Ordering Spare or Repair Parts
3910-1
1th IOM 5/08
5
* American Petroleum Institute
1220 L Street, Northwest
Washington, D.C. 20005