Goulds Pumps 3420 - IOM - Manual (Page 17)

NAMEPLATE INFORMATION
Every pump has two or three Goulds nameplates that provide
information about the pump. The tags are located on the
upper half and lower half of the casing. When ordering parts, you will need to identify the pump
model, size, serial number, and the item number of the
required parts. Information can be taken from the pump
casing tags. Item numbers can be found later on in this
manual.
3420 IOM 8/09
9
1
Description Fig. No. Example
Pump Casing Tag - provides information
about the pump’s hydraulic
characteristics. Note the format of the
pump size: Discharge x Suction - Nominal
maximum Impeller Diameter in inches.
(Example: 2x3-8)
(Figs. 1 & 2).
Fig. 1
English
Fig. 2
Metric
Bearing Frame Tag - provides
information on the lubrication system used
(Fig. 3). Fig. 3
ATEX Tag - If applicable, your pump
unit may have the following ATEX tag
affixed to the pump and/or baseplate. See
the Safety section for a description of the
symbols and codes
(Fig. 4). Fig. 4