Goulds Pumps ANSI FAMILY IOM (ATEX Compliant) - IOM - Manual (Page 15)

ANSIFAM IOM - 5/08
13
GENERAL INFORMATION
PUMP DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PARTS COMMONALITY . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
NAMEPLATE INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . 18
RECEIVING THE PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Storage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PUMP DESCRIPTION
Model Pump Description Size Groups
No. of
Sizes
3196
The model is based on 5 power ends and 29 hydraulic pump sizes.
The 3196 is a horizontal overhung, open impeller, centrifugal pump that meets the
requirements of ANSI B73.1.
STX
MTX
LTX
XLT-X
X-17
5
15
15
5
4
CV 3196
The model is based on four power ends and seven hydraulic pump sizes.
The CV 3196 is a horizontal overhung, recessed impeller, centrifugal pump. It is
specifically designed to handle bulky or fibrous solids, air or gas entrained liquids, or
shear sensitive liquids.
STX
MTX
LTX
XLT-X
1
4
5
1
HT 3196
The model HT 3196 is based on 4 power ends and 28 hydraulic pump sizes.
The HT 3196 is a horizontal, centerline mounted, overhung, open impeller, centrifugal
pump that meets the requirements of ANSI B73.1
STX
MTX
LTX
XLTX
6
16
17
5
LF 3196
The model is based on 3 power ends and 4 hydraulic pump sizes.
The LF 3196 is a horizontal overhung, open impeller, centrifugal pump that meets the
requirements of ANSI B73.1. It is designed specifically for low flow high head
applications.
STX
MTX
LTX
2
2
2
NM 3196
The model is based on 2 power ends and 13 hydraulic pump sizes.
The NM 3196 is a horizontal overhung, open impeller, centrifugal pump that meets the
requirements of ANSI B73.1. It is made of a fiber reinforced vinylester to handle severe
corrosives.
STX
MTX
5
8
3198
The model is based on 2 power ends and 4 hydraulic pump sizes.
The 3198 is a horizontal overhung, open impeller, centrifugal pump that meets the
requirements of ANSI B73.1. It is made of a Teflon
® lined ductile iron to handle severe
corrosives.
STX
MTX
1
3
3796
The model is based on 3 power ends and 8 hydraulic pump sizes.
The 3796 is a horizontal overhung, self priming, open impeller, centrifugal pump.
STX
MTX
LTX
2
6
6
2