Myron L 760-A Aquaswitch - Manual (Page 5)

SECTION 2
Installation
2.1 GENERAL
Section 2.2 provides the user with the recommended procedures
for mounting the Aquaswitch/760-A Aquaswitch and for completing
their necessary electrical installation.
NOTE:
The Myron L Company recommends that all mounting and electrical
installation procedures be performed by trained and authorized
personnel ONLY! Failure to do so could result in damage to
equipment and/or property
2.2 MECHANICAL INSTALLATION
All Aquaswitch and 760-A Aquaswitch electronics are packaged
inside drip/weather-proof housings. Their physical dimensions have
been designed to allow for both surface and panel mounting.
There are three basic guidelines to consider when selecting the
Aquaswitch’s mounting location:
1 Select a site that limits the Aquaswitch’s exposure to
excessive moisture and corrosive fumes.
2 For best results, position your control area as close as
possible to the point(s) being controlled
3