beautypg.com

Removing the pcmcia card, Removing the touchpad module – Acer 505 User Manual

Page 60

background image

54

Chapter 3

Removing the PCMCIA Card

1.

Remove the four screws holding the PCMCIA slot.

2.

At CN13, disconnect the PCMCIA slot from the mainboard.

Removing the Touchpad Module

1.

To remove the touchpad module, first release the touchpad cable from the position shown here.

2.

Remove the six screws holding the touchpad bracket.

3.

Now, lift the touchpad module away from the upper case.

4.

Disconnect the touchpad cable from the touchpad board, then remove the touchpad bracket.

505-1.book Page 54 Thursday, November 4, 1999 4:36 PM

See also other documents in the category Acer Notebooks: