Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 21 to 32 - Manual (Page 56)

Changing the Grip Cylinders
3. Pull out the Grip Cylinder Cap side
Pin (CP).
4. Remove 3 clevis bolts (CB) using
the 15/16" wrench.
5. Slide out the Grip Cylinder (C).
6. Place the new Grip Cylinder into
the Cap side Eye (CE) and Rod
side Eye (RE).
7. Insert the Top Grip Cylinder Cap
side Pin (CP).
8. Replace the 3 clevis bolts (CB)
using the 15/16" wrench.
9. Use the Two 11/16" wrenches to
connect the Cap side Hose (CH).
10. Use the Two 11/16" wrenches to
connect the Rod side Hose (RH).
CP CB
CH RE RH CE
Part Name Part #
Grip Cylinder Cap Pin (CP) 061-98404A874
Grip Cylinder Rod Pin (RP) 061-98404A888C
Grip Cylinder (C)
061-J26
Part Numbers
C
56 Maintenance & Repair
WARNING
Make sure the Grip Cylinder Rod
and Cap side Hoses are properly
connected.
SC