Start-up procedure, Mt p a – Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 21 to 32 User Manual
Page 14

Start-up Procedure
1. Connect the air power source with the Air
(A) line.
2. Make sure the hydraulic reservoir is full.
3. Connect the hydraulic Pressure (P), Tank
(T) and Air (A) lines. "P" and "T" Port
Designations are stamped on the Main
Hydraulic Manifold (M). Do not hook up
the hoses backward
4. Check for hydraulic leaks.
Operation
14
NOTE
Tightly connect the hose fittings. A loose
connection causes a pressure drop in the
hydraulic fluid which heats up the fluid and
reduces component life.
Part Numbers
Part Name
Part #
Male Quick Disconnect (P)
061-H52
Female Quick Disconnect (T)
061-H53
Male Air Quick Disc. (A)
061-A12M
Female Air Quick Disc.
061-A12F
M
T
P
A