Beijer Electronics M70 EN - Manual (Page 7)

Safety Precautions
Beijer Electronics, MAEN843A 7
Enabling Switch
– The enabling switch is only suitable as safety function if the operator activat-
ing the enabling switch recognizes the dangerous situation in time so that he
can immediately take the necessary measures to avoid such situations.
– As additional measure reduced speed of the movement can be necessary. The
allowed speed must be determined by means of a risk assessment.
– The enabling switch is only used to enable commands for performing danger-
ous movements. The commands themselves must be activated by a separate
operating element (key on handheld operator panel).
– Only the person who operates the enabling switch is allowed to work in the
dangerous area.
1.3 Service and Maintenance
– Only qualified personnel should carry out repairs.
– The agreed warranty applies.
– Before carrying out any cleaning or maintenance operations, disconnect the
equipment from the electrical supply.
– Clean the display and surrounding front cover with a soft cloth and mild
detergent.
1.4 Dismantling and Scrapping
– The handheld operator panel or parts thereof shall be recycled according to
local regulations.
– The following components contain substances that might be hazardous to
health and the environment: electrolytic capacitor and display.
Note:
The enabling switch is hardware dependent, and are separated from the software
running in the operator panel. The panel will function normally, regardless of the
status of the enabling switch. See section Enabling Switch for information.