Acer 365 - Manual (Page 33)

System Introduction 1-23
The following processes are the basic methods used to implement the LCD brightness AutoDim.
1. If the original brightness is over 75% and the AC power is on-line, the BIOS will change the
brightness to 75% after the AC power is off-line.
2. If the original brightness is below 75%, the brightness maintains the same level even if the AC
power is off-line.
3. If the brightness is already changed by the hotkey under DC power, it will not be changed after
the AC power is plugged in.
4. If the brightness is not changed by the hotkey under DC power, the brightness will be changed
back to the old setting — the previous brightness parameter under AC power.
5. If the previous brightness parameter does not exist, the brightness will not be changed in
process 4.
1.4.2 Drivers, Applications and Utilities
The notebook comes preloaded with the following software:
•
Windows 95
1
•
System utilities and application software
2
•
Sleep Manager utility
•
Display drivers
•
Audio drivers
•
PC Card slot drivers and applications
•
Other third-party application software
Table 1-35 Location of Drivers in the System Utility CD
Device Category Function Location
Sound, video and game controllers Audio ENGLISH\WIN95\AUDIO\
Mouse Mouse ENGLISH\WIN95\MOUSE\
Display adapters Video ENGLISH\WIN95\VGA\
PCMCIA Zoomed Video Port English\Win95\PCMCIA\
1
In some areas, a different operating system may be pre-loaded instead of Windows 95.
2 The system utilities and application software list may vary.