Pulsafeeder Pulsar Shadow - Manual (Page 34)

8. Replacement Parts
8.1 PULSAR Shadow ® KOPkit Program
Figure 22
PULSAR Shadow
® KOPkits contain all replacement parts normally used in a preventative
maintenance program. Having a KOPkit on hand can eliminate delays in repairing a pump and
returning it to a critical service. Pulsalube 9M eccentric oil and Pulsalube 8G gear oils are also
available for preventative maintenance programs, and should be kept on hand. There is a specific
KOPkit for every PULSAR Shadow
® pump model. Each KOPkit is vacuum-packed for extended
storage. All PULSAR Shadow ® pumps have the KOPkit number identified on the pump
nameplate and Pulsafeeder order documents. KOPkits can also be selected from the technical
data sheet shipped with the pump or with the assistance of a Pulsafeeder representative.
8.2 Ordering KOPkits or Parts
When ordering replacement parts always specify: Pump model and serial number (stamped on
pump nameplate), e.g., Model No.L2 with Serial No. 9876303-1.
Provide the part number and description from the PULSAR Shadow
® parts list. Include the three-
character suffix. (Note: PULSAR Shadow ® part numbers begin either with the letters ‘NP’, or
the letter ‘W’, e.g., NP170001-TNR or W210221-001.)
28