Pulsafeeder Pulsar Shadow - Manual (Page 31)

To replace the gearbox oil seal:
First drain the gearbox per the lubrication instructions. Remove the four gearbox bolts, and
withdraw the gearbox from the eccentric box, sliding it off the eccentric shaft. Remove the seal.
Lubricate the replacement with Pulsalube 8G gear oil and install by pressing into position.
Reinstall by reversing the disassembly procedure. Refill the gearbox with Pulsalube 8G gear oil
per Lubrication.
To replace the eccentric box seal:
First remove the gearbox per step 3 above. Remove the four bolts, which retain the eccentric side
cap to the eccentric box. Remove the eccentric side cap and withdraw the eccentric shaft.
Remove the seal. Lubricate the replacement with Pulsalube 8G gear oil and install by pressing it
into position. Reinstall by reversing the disassembly procedure. Refill the gearbox with
Pulsalube 8G gear oil per the lubrication instructions.
Figure 20
25