Contents replacing the server certificate – Avocent SwitchView User Manual
Page 50
Appendices
45
44
SwitchView IP Installer/User Guide
Contents
Replacing the Server Certificate
You can replace the default SwitchView IP server certificate with another
certificate. Make sure the new certificate is in Privacy Enhanced Mail format
and is at least 1024 bits in size.
To replace the default server certificate:
1.
Open an FTP session and log in to the SwitchView IP as admin
(default username).
2. Replace the default server certification with a new certificate by
entering the following command:
put
3. Wait 10 seconds for FLASH write to complete before rebooting.
4. Cycle power to the SwitchView IP. The new server certificate is in place.