Connecting a usb keyboard and mouse – Avocent SwitchView User Manual
Page 23
Chapter 2: Installation
17
16
SwitchView IP Installer/User Guide
Chapter 2: Installation
17
Connecting a USB Keyboard and Mouse
The instructions in this section and Figure 2.4 provide information for con-
necting a USB keyboard and mouse to the SwitchView IP.
To connect a USB keyboard and mouse:
1.
Obtain a USB A/B cable (not included) and attach the type A connector
to the USB port on the host computer.
2. Attach the USB cable type B connector to a USB port on the
SwitchView IP.
3. Attach the USB keyboard connector to another USB port on the
host computer.
4. Attach the USB mouse connector to the USB port on the keyboard or
on the host computer.
Figure 2.4: USB Keyboard and Mouse Connection
SwitchView IP
Front View
Rear View
External Switch
USB Cable
Host Computer
USB Keyboard
USB Mouse
Network