Avocent SwitchView - Manual (Page 36)

Chapter 3: Operations
31 30
SwitchView IP Installer/User Guide Chapter 3: Operations
31
SwitchView IP Viewer Options Menu
Command Description
Force Screen Refresh Forces the screen to refresh to the original quality.
Force Screen
Auto Alignment Forces the SwitchView IP to perform a screen alignment.
Toggle Full Screen Toggles screen size.
Viewer Options Phase settings. Enables you to select quality of video allowing
higher speed video performance. There is also a setting for
horizontal and vertical screen alignments.
Show frames/sec and
Network bits/sec Displays the current bandwith usage in frames per second and
network bits per second. The information is shown in the lower
left
of the Viewer screen.
Auto Mouse Sync Synchronizes mouse movements of the host computer and
the VP Viewer. The default and recommended setting is On.
Set the Auto Mouse Sync to Off only if the host computer
operating system does not provide an option to turn off mouse
acceleration. For more information on configuring mouse
acceleration and erratic mouse movements, see Chapter 2 and
Appendix C.
Show Startup Dialog Displays the startup dialog. The default and recommended
setting is On.
Using the SwitchView IP Viewer Connection menu
The SwitchView IP Viewer Connection menu options enable you to manually
or automatically set the correct compression and throttle line speed for
optimum performance and security. Lowering encryption and compression
levels can increase performance.
SwitchView IP Viewer Connection Menu
Options Description
56 K Dial up speeds, lowest speeds, highest compression.
DSL Low speeds (500 Kps), high compression.
T1 1Mbps, high compression.
Low BW LAN 2 Mbps, low bandwidth, LAN speeds, medium compression.
LAN 10 Mbps, lowest compression.
Auto Automatically selects the appropriate network connection.
Encrypt Everything All video, keyboard, video and mouse data is encrypted. This
setting is normally enabled through the SwitchView IP Web
Server Security configuration page.
Encrypt KB & Mouse Only keyboard and mouse data are encrypted. This setting is
normally enabled on the SwitchView IP Web Server Security
configuration page.