Avocent SwitchView - Manual (Page 31)

Chapter 2: Installation
25 24
SwitchView IP Installer/User Guide Chapter 2: Installation
25
2. Click Connect.
3. If you are prompted, enter the IP address of the SwitchView IP.
NOTE: For Microsoft Internet Explorer 5.5 SP2, 6.0 and 6.1, the IP address is automatically
passed through to the SwitchView IP. If you are running an earlier version of Internet Explorer,
update it to version 5.5 or later.
4. From the SwitchView IP Viewer screen, you now can view the host
computer, control its keyboard and mouse and execute tasks. For
more information on viewing and controlling computers, see Using the
SwitchView IP Viewer in Chapter 3.
Understanding the Status LEDs
The following table lists the SwitchView IP status LEDs and their states
when illuminated.
LED Name and Status
LED Name LED On
Remote Session SwitchView IP Viewer session active
Power SwitchView IP powered
Ready SwitchView IP internal system running
Error SwitchView IP internal error (contact Avocent Technical Support)
Restoring Factory Default Settings
You can restore the SwitchView IP factory default settings by depressing the
external switch for one second. The external switch is located next to the
Power port on the back of the device, as shown in Figure 2.4. This switch is
not a reset switch, and data is not preserved.