Avocent SwitchView - Manual (Page 48)

Chapter 4: Advanced Configuration
43 42
SwitchView IP Installer/User Guide Chapter 4: Advanced Configuration
43
Figure 4.4: Add User Dialog Box
NOTE: For detailed information on the RRU sequence strings to specify for each power
function, consult the RRU manufacturer documentation.
5. The SwitchView IP Web Server power control buttons will respond
to the RRU settings. For example, Reset Host Power uses the RRU
Toggle Power sequence string.
Configuring Users and Access Rights
The Users window allows you to add and manage user rights to access
the SwitchView IP. The SwitchView IP Web Server provides the following
levels of access you can assign to your users:
• Users with full control access can control the host computer and
power it up or down, if an RRU is installed.
• Users with administrator access can add and delete users and change
their access rights, in addition to controlling the host computer.
To add a user and assign rights:
1. From the Global Settings window, under Category, click Users.
2. From the Users window, click Add and then type a user ID,
username and password for the new user.