Sony DPP-FP97 - Manual (Page 81)

81 GB
Ad
diti
on
al i
n
fo
rma
tio
n
With the SD memory Card/xD-Picture Card
dual-format slot of the printer, you can use an
xD-Picture Card
*5 . Not all the memory card
operations are supported and we do not
guarantee proper operations for all types of xD-
Picture Card.
*5 The printer has been demonstrated as operable
with an xD-Picture Card with a capacity of 2 GB or
smaller.
The CompactFlash card slot of the printer
allows you to use the following:
• CompactFlash Storage Card (Type I/Type II)
and CF+Card (Type I/Type II)-compatible
CompactFlash Storage Card
*6*7 .
You can also use a Smart Media card by using a
commercially available CompactFlash card
adaptor
*8
However, we do not guarantee proper
operations for all types of CompactFlash cards.
*6 Use a CompactFlash card with a power
specification of 3.3V or 3.3V/5V. You cannot use
a type for 3V or 5V only. Do not insert other types
of CompactFlash card into the printer’s insertion
slot. The printer may be damaged.
*7 The printer has been demonstrated as operable
with an
CompactFlash with a capacity of 32 GB
or smaller.
*8 When using a commercially available
CompactFlash card adaptor, refer to the operating
instructions of the adaptor you use for how to
install the card and adaptor. When using the
CompactFlash card adaptor, the write-protected
card may not work properly.
• When using a card, make sure to check
correct insertion direction of the card and
correct insertion slot.
• Do not remove a card or turn off the printer
while the printer is reading or accessing data,
or the access indicator is flashing.
• We recommend that you save backup of the
important data.
• The data processed with the computer may
not be played with the printer.
• When you carry or store a card, put it in the
case supplied with it.
• Do not touch the terminal of a card with your
hand or a metal object.
• Do not strike, bend or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the
following conditions:
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun or/
and in the summer, the outdoors exposed
to direct sunlight, or a place near a heater
– Humid locations or locations with
corrosive substances present
– Locations subject to static electricity or
electrical noises
xD-Picture Card
CompactFlash card
Notes on using memory card