beautypg.com

Adjusting an image, Adding a special filter to an image, Adding a special filter to an image . 22 – Sony DPP-FP97 User Manual

Page 22

background image

22

GB

1

From the

Edit menu (page 18),

press g/G to select

(Adjust) and

then press ENTER.

The Adjust menu is displayed.

2

Press f/F to select the desired
adjustment tool and press ENTER.

The adjustment screen of the selected tool
appears.

Press g/G to adjust an image while
checking the level.

The image before adjustment is displayed
on the left half of the screen, and the
adjusted image is displayed on the right.

Brightness: Press G to brighten the

picture or g to darken it.

Tint: Press G to make the picture

greenish or g to make it reddish.

Saturation: Press G to deepen the

colors or g to lighten them.

Sharpness: Press G to sharpen the

outlines or g to soften them.

3

Press ENTER.

The adjustment takes effect.

4

Press PRINT.

1

From the

Edit menu (page 18),

press g/G to select

(Filter) and

then press ENTER.

The Filter menu is displayed.

.

2

Press f/F to select the filter you
want to add to the image.

No Filter: No special filter is used on

the image (default setting).

Single Color: Changes all the colors

except for the one specified color into
gray scale.

Painting: Makes the image look like a

painted picture.

Cross Filter: Adds a cross, starburst

effect to the light source to print an
image with a sparkling impression.

Partial Color: Makes the

surroundings of the subject
monochrome to emphasize the subject
in the center.

Sepia: Changes the image to look like

an old photograph with faded colors.

Monochrome: Changes the image

into a black and white picture.

Adjusting an image

When “Brightness” is selected.

Adding a special filter to

an image

The “Painting” filter of the printer is uses the
technology of Ichikawa Soft Laboratory.