10 pc health status, 10-1 smart fan configuration – AMD Socket AM2+ Quad Core AMD Processor SB750 User Manual
Page 36

31
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
PC Health Status
Help Item
PC Health Status
Smart FAN Configuration Press Enter
H/W Health Function Enabled
CPU Temperature: 50
°C/122°F
System Temperature: 60
°C/140°F
CPUFAN Speed: 2923RPM
SYSFAN1 Speed: N/A
SYSFAN Speed: N/A
NB1.2V : 1.160V
VDIMM : 2.688V
VCORE: 1.132V
NBPCIE: 1.128V
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
H/W Health Function,
it displays information list below when set as below. The choice is either Enabled or
Disabled.
CPU Temperature/ System Temperature/CPUFAN/SYSFAN1 Speed/SYSFAN2 Speed
/NB1.2V/VDIMM/VCORE/NBPCIE
This will show the CPU/ /System voltage chart and FAN Speed, etc.
3-10-1 Smart FAN Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Smart FAN Configuration
Help Item
FAN1 Mode Setting Auto Fan by RPM
Temperature1 Limit of Hig 050
Temperature1 Limit of Sec 040
Temperature1 Limit of Thi 030
Temperature1 Limit of Low 020
FAN1 Highest Setting 100
FAN1 Second Setting 080
FAN1 Third Setting 070
FAN1 Forth Setting 060
FAN1 Lowest Setting 050
Fan Configuration Mode
Setting
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Smart FAN Configurations FAN1 Mode Setting
The optional settings are: Auto Fan by RPM; Auto Fan by Dutycycle; Manual Mode by RPM
and Manual Mode by Dutycycle.