AMD Socket AM2+ Quad Core AMD Processor SB750 - Manual (Page 21)

16
Primary IDE Connector
Pin 1
IDE1
• Two hard disks can be connected to each connector. The first HDD is referred to as the
“Master” and the second HDD is referred to as the “Slave”.
• For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(9) Serial-ATAII Port connector: SATA1~SATA6; E-SATA1
This connector supports the provided Serial ATA2 IDE hard disk cable to connecting
the motherboard with serial ATAII hard disk. E-SATA1 is not for SATA hard drive, it
is only for connecting to SATAII 1, SATA II 2, SATA3, SATA4, SATA5, and SATA6
to let the ESATA port work.
Serial-ATA Connectors
SATA1
E-SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
(10) ESATA Port:
CN5 for ESATA
This connector supports the External Serial ATA2 (ESATA) enable the full SATA
interface speed outside the chassis, up to 3Gb/s. The ESATA port can be enabled only
when the E-SATA 1 is connected to one of SATA 1~SATA6.
(11) D-Sub 15-pin Connector: VGA
VGA is the 15-pin D-Subminiature female connector; it is for the display devices, such
as the CRT monitor, LCD monitor and so on.
(12) Digital Visual Interface: DVI 1
This interface standard designed to maximize the visual quality of digital display
devices such as flat panel LCD computer displays and digital projectors.
(13) High-Definition Multimedia Interface: HDMI
This point-to-point interface is for audio and video signals designed as a single-cable
solution for home theater and consumer electronics equipment.
NOTE! DVI and HDMI Connector can not be used at the same time.