Atlas Air Compressor - Manual (Page 55)

Instruction book
2920 1521 00 55
3. Press the tabulator key (5), following screen appears:
Monday →
Tuesday
Wednesday ↓
Back Delete
F1 F2 F3
4. Use
the ↓ or ↑ key until the day on which a command must be programmed is followed by a right
pointing arrow. Press the tabulator key (5), following screen appears:
--:-- -------------------------------------- ┤
--:-- --------------------------------------
--:-- -------------------------------------- ↓
Back Modify Delete
F1 F2 F3
5. Press the key "Modify" (F2). The first two digits will flash. Use the
↓ or ↑ key to enter "06". Press
the tabulator key to jump to the following two dashes. Use the ↓ or ↑ key to enter "15". Press the
tabulator key to jump to the row of dashes. Use the ↓ or ↑ key to enter the command Start. Press
the key "Program" to program the command: 06:15 Start
6. Press the ↓ key: the symbol ┤ indicates that the second line is accessible. Press the key "Modify"
and modify this line to the following command line: 06:15 Pressure Band 1 in a similar way.
7. Press the key "Back" (F1) and scroll to "Friday":
Thursday ↑
Friday →
Saturday ↓
Back Delete
F1 F2 F3
8. Programming the command to change over at 18 o’clock to Pressure Band 2 is carried out in a
similar way as described above.
9. Press the key "Back" (F1) and scroll to "Saturday". Programming the command to stop at 18
o’clock is carried out in a similar way as described above.