Atlas Air Compressor - Manual (Page 31)

Instruction book
2920 1521 00 31
Period
Running
hours Service
Plan See
section See
notes
below
table Operation
Daily -- -- 3.4 -- Drain condensate
" -- -- -- -- On SF Full-Feature, check dewpoint
Monthly 250 -- 5.1 1 Inspect air filter
3-monthly 500 -- -- -- Check pressure drop over Atlas Copco filters
(optional)
6-monthly -- -- 5.4 -- Operate safety valve
" -- -- -- -- Clean compressor
" -- -- -- -- On SF Full-Feature, brush or blow off the finned
surface of the condenser
" -- -- -- -- On SF Full-Feature, clean condensate trap
internally
Yearly -- -- 5.4 -- Test safety valve
" -- -- -- -- Have electrical components/shut-down switch
tested
" 2500 I 5.2 -- Check tension/condition of V-belt(s)
" 5000 A 5.1 -- Replace air filter
" 5000 A -- 2 Have ball valve mechanism of condensate trap
inspected
" 5000 A 5.2 -- Replace V-belt(s)
2-yearly 5000 B -- 2 Have orbiting scroll bearing greased
" 10000 B -- 2 Clean compressor element fan and duct. Clean
compressor element fins, have seals replaced
" 10000 B -- 2 Have pin crank bearings greased
Notes:
1.
Check more frequently if operating in a dusty atmosphere. Check for cleanness and damage.
Replace a dirty or damaged filter by a new one.
2. Consult Atlas Copco.