Atlas Air Compressor - Manual (Page 53)

Instruction book
2920 1521 00 53
Important
Always consult Atlas Copco in case any timer setting should be changed. The intervals must not
exceed the periods below and must coincide logically.
Programmed service plan intervals
Service plans
Intervals
Service plan I Each 2500 running hours
Service plan A Each 5000 running hours
Service plan B Each 10000 running hours
Service plan D Each 20000 running hours
Resulting service actions to be carried out
Service actions according to
At
Service plan I 2500 running hours
Service plan I and A 5000 running hours
Service plan I, A and B 10000 running hours
Service plan I, A, B and D 20000 running hours
… …
Procedure
1. Starting from the Main screen (see section 8.1.2):
- press the key "Menu" (F1)
- press the ↓ key until the option "Modify parameters" is followed by a horizontal arrow
- press the tabulator key (5) to activate the menu
2. Use the ↓ key to scroll until the option "Service plan" is followed by a horizontal arrow.
3. Press the tabulator key (5): a screen similar to the one below will appear:
Service Timer
Running Hours →
1075 hrs ↓
Menu
F1 F2 F3
Fig. 8.16 Service menu
The screen shows the actual running hours (1075).