Sony DSC-P71 - Manual (Page 30)

30
filename[C:\WINDOWS\Desktop\3074351111\3074351111UC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P31/P71]
[3 074 351 11(1)]
, Center the subject in the frame,
and press the shutter all the
way down.
The Self-timer lamp (page 10 for the DSC-
P71, page 12 for the DSC-P31) will blink in
orange, and you will hear a beeping sound.
The image will be shot within
approximately 10 seconds.
To cancel the self-timer in the middle
of the operation
Press V ( ) on the control button one more
time.
• If you stand in front of the camera and press the
shutter, the focus and the exposure may not be
correctly set.
Selecting a flash mode
, Turn the mode dial to select ,
and press v ( ) on the control
button repeatedly to select a
flash mode.
Flash mode has the following features.
No indicator (Auto): Based on the
lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly (factory setting).
(forced flash): The flash will be used
regardless of the amount of ambient light.
(no flash): The flash will not be used.
Each time you press the button, the display
changes as follows.
When POWER SAVE is OFF
No indicator (Auto) t (forced flash) t
(no flash)
When POWER SAVE is ON
(no flash) t No indicator (Auto) t
(forced flash)
• If the menu is currently displayed, press the
MENU button first and the menu will
disappear.
• You can change the brightness of the flash
using “FLASH LEVEL” in the settings menu
(page 93).
• When Flash mode is set to Auto or (forced
flash), and you look at the LCD screen in a dark
place, you may notice some “noise” in the
image, but this will have no effect on the image
you shoot.
• While the flash is being charged, the Flash
charging lamp blinks. When charging is
completed, the lamp goes out.
• When you press the shutter button halfway
down while the flash is flashing, ( ) the Flash
charge lamp turns on.
2
2048
F 2 . 3
3
0EV
5 0
2048
4
01cov.book Page 30 Friday, January 25, 2002 11:30 AM