Sony VPL-VW1100ES User Manual
Page 9
9
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
1
After connecting the AC power
cord to the unit, plug the AC
power cord into a wall outlet.
The ON/STANDBY indicator lights in
red and the unit goes into standby mode.
2
Press the
?
/
1
(ON/STANDBY)
button to turn on the unit.
The lens protector will open.
The ON/STANDBY indicator flashes in
green, and then lights in green.
3
Adjust the focus.
Press the LENS ADJUSTMENT
(FOCUS) button to display the Lens
Focus adjustment window (test pattern).
Then adjust the focus of the picture by
pressing the
M/m/
Tip
When “Lens Control” is set to “Off” on the
Installation
menu, you cannot adjust the
focus, the picture size or the proper position by
pressing the FOCUS, ZOOM or SHIFT buttons
(
When “Test Pattern” is set to “Off” on the
Function
menu, the test pattern is not
displayed (
Adjust the lens by using buttons on the remote
control or the control panel of the unit. Never
make adjustments by directly turning the lens
with your hands, which may cause damage or
malfunction to the unit.
4
Adjust the picture size.
Press the LENS ADJUSTMENT
(ZOOM) button to display the Lens
Zoom adjustment window (test pattern).
Then adjust the size of the picture by
pressing the
M/m/
To make the picture larger, press
M/,.
To make the picture smaller, press
m/
<.
Lights in red.
Flashes in green for
tens of seconds and
then lights in green.
Note