Sony VPL-VW1100ES - Manual (Page 68)

68
• The values for mass and dimensions are approximate.
• Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
• Information on accessories in this manual is current as of October 2013.
Design and specifications of this unit and its optional accessories are subject to change without notice.
The following table shows the signals and video formats which you can project using this
unit.
When a signal other than the preset signal shown below is input, the picture may not be
displayed properly.
Standby power 100V-120V AC: 3.5 W (when “Standby Mode” is set
to “Standard”) / 0.3 W (when “Standby Mode” is set
to “Low”)
220V-240V AC: 3.9 W (when “Standby Mode” is set
to “Standard”) / 0.4 W (when “Standby Mode” is set
to “Low”)
Operating temperature 5°C to 35°C (41°F to 95°F)
Operating humidity 35% to 85% (no condensation)
Storage temperature –20°C to +60°C (–4°F to +140°F)
Storage humidity 10% to 90%
Supplied accessories See “Checking the Supplied Accessories” in the
supplied Quick Reference Manual.
Optional accessories Projector Lamp: LMP-H330 (for replacement)
Projector Suspension Support: PSS-H10
3D glasses: TDG-PJ1
3D Sync Transmitter: TMR-PJ2
Notes
Preset Signals
Preset
memory
no.
Preset signal
(resolution)
fH
(kHz)
fV
(Hz)
Sync Pitch
(H Size)
3 480/60i 480/60i
(720 × 480i) 15.734 59.940 SonG/Y –
4 576/50i 576/50i
(720 × 576i) 15.625 50.000 SonG/Y –
5 480/60p 480/60p
(Progressive
NTSC)
(720 × 480p) 31.470 60.000 SonG/Y –
6 576/50p 576/50p
(Progressive
PAL)
(720 × 576p) 31.250 50.000 SonG/Y –
Item Description