Sony VPL-VW1100ES - Manual (Page 42)

42
Function Menu
The Function menu is used for changing the settings of the various functions of the unit.
3D Settings You can change the settings of the 3D function.
2D-3D Display Sel.: For Switching the video images to “2D” or
“3D.”
Auto: Displays 3D video images when HDMI signals with 3D
information are input. Displays 2D video images when other
signals are input.
3D: Displays 3D video images according to the 3D system
selected in “3D Format.” However, when HDMI signals with 3D
information are input to the unit, displays 3D video images
according to the 3D system of those HDMI signals.
2D: Displays 2D video images.
* The 3D information is additional information to discriminate
3D. Some HDMI signals have additional information to
discriminate 3D and some HDMI signals have none.
3D Format: Set the 3D system when the input HDMI signals do not
include 3D information.
Simulated 3D: Converts 2D video images to 3D video images.
The setting can be made only for input the HD signals.
• The simulated 3D feature may have limited effect, depending
on the video source.
• There are differences in perception of 3D video images among
individuals.
Side-by-Side: Select this to display 3D images as two similar
images, side-by-side.
Over-Under: Select this to display 3D images as two similar
images, one above the other.
3D Brightness: For adjusting the brightness of the picture when
watching 3D video images. You can select the brightness “High”
or “Standard.”