Sony VPL-VW1100ES - Manual (Page 62)

62
Caution messages
Power Saving Mode is set.
Projector lamp will
automatically cutoff in 1
minute. c “Power Saving” is set to “Lamp Cutoff.” (1 page 41)
If no signal is input, the lamp turns off after 1 minute.
Power Saving Mode is set.
Projector will
automatically enter
Standby Mode in 1 minute. c “Power Saving” is set to “Standby.” (1 page 41)
If no signal is input, the power turns off after 1 minute, and the
projector goes into standby mode.
Message Cause and Remedy
c No signal is input in the selected input. Check connections
( 1 page 13).
Not applicable! c Press the appropriate button.
c The operation to be activated by the button is currently
prohibited.
Message Cause and Remedy
Note
Note
x