Sony VPL-VW1100ES - Manual (Page 47)

47
U
s
in
g t
he M
e
n
u
s
Blanking This feature allows you to adjust the displayable region within
the four directions of the screen.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom
using the
M/m buttons.
Adjust the amount of blanking using the
Tip
Depending on the aspect ratio setting, right/left blanking may not be
available.
Panel Alignment This feature allows you to adjust the gaps in the color of
characters or the picture.
When set to “On,” “Adjust Color” and “Pattern Color” can be
assigned and adjusted.
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color.
Select “R” (Red) or “B” (Blue) to make adjustments based on
“G” (Green).
Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White,
all colors) when “Adjust Color” is “R” (Red). Select “B/G” (Blue
and Green) or “R/G/B” (White, all colors) when the “Adjust
Color” is “B” (Blue).
Adjust: The shift adjustment and zone adjustment of the color
selected in “Adjust Color” can be made with
buttons.
When “Shift” is selected: Assign the settings of the horizontal
direction (H) with
with M/m buttons on the shift adjustment screen.
When “Zone” is selected: Select the position to adjust with
buttons for the vertical position (V position), then press
.