Sony DSLR-A700 - Manual (Page 156)

156
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
• The date may not be superimposed in the index mode depending on the printer. Consult the
printer manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date inserted. Set [Date
imprint] to [Off] and print the image again (page 148).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the USB cable and reconnect it whenever you change the paper size after the
printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 147) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 168).
The message “Set date and time?” appears when you turn on the camera.
• The camera has been left unused for sometime with a low battery or no battery pack. Charge
the battery pack and set the date again (
t step 4 in “Read This First”). If the date setting is
lost every time the battery pack is charged, consult your Sony dealer or local authorized Sony
service facility.
The number of recordable images does not decrease or decreases two at a
time.
• This is because the compression rate and the image size after compression change depending
on the image when you shoot with a JPEG image (page 96).
Others