Dpof setup, Of set (116) – Sony DSLR-A700 User Manual
Page 116
116
For details on the operation
1
To protect all the images
1
Select [All images] in [Protect].
The message “Protect images?” appears.
2
Select [OK] with v on the multi-selector, then press the center of the multi-selector.
The image is protected, and the screen returns to the playback screen.
To cancel the protection
1
Select [Cancel all] in [Protect].
The message “Cancel all?” appears.
2
Select [OK] with v on the multi-selector, then press the center of the multi-selector.
The image protection is canceled, and the screen returns to the playback screen.
Using the camera, you can specify the images and the number of images to print before you
print images at a shop or with your printer.
Follow the procedure below.
• You cannot mark RAW data files.
• You can specify any number up to 9.
To specify DPOF on selected images
1
Select [Marked images] in [DPOF setup].
2
Select the image you want to mark with b/B on the multi-selector, then select the number of
sheets with the rear control dial.
A DPOF mark appears on the selected image, and the number of sheets is selected.
• To cancel a selection, rotate the rear control dial to remove the DPOF mark.
3
To specify DPOF on other images, repeat step 2.
• To cancel, press
(Playback).
4
Press MENU.
The message “Set DPOF?” appears.
5
Select [OK] with v, then press the center of the multi-selector.
The DPOF is specified on the selected images, and the screen returns to the playback screen.
DPOF setup
Marked images
Specifies DPOF only on the selected images.
All images
Specifies DPOF on all the images in the memory card.
Cancel all
Unspecifies DPOF on all the images in the memory card.
DPOF
Total number