A&D Waterproof Digital Platform Scale HW-60KV-WP User Manual
Page 56
Page 54
HV-WP/HW-WP Series
16. RS-232C Serial Interface
16.3.2.
16.3.2.
16.3.2.
16.3.2. Example of Setting Parameters
Example of Setting Parameters
Example of Setting Parameters
Example of Setting Parameters
Step 1 Turn off the display.
Press the
ON/OFF
switch while the
ZERO
switch is
pressed and held. The function table is displayed.
Step 2 Select a parameter for the "baud rate ( f4 )" using the
ENTER
and
∧
switches.
Step 3 Select "command mode ( f5 1 )" for the "output"
using the
ENTER
and
∧
switches.
Step 4 Select "format 1 ( f15 0 )" for the "format" using the
ENTER
and
∧
switches.
Step 5 Press the
ENTER
switch to store the new parameters.
Return to the normal weighing mode using the
ENTER
switch.
Step 6 Receiving a command, the scale replies.
This manual is related to the following products: