A&D Waterproof Digital Platform Scale HW-60KV-WP - Manual (Page 12)

Page 10 HV-WP/HW-WP Series 5. 1. Removing the ploe
Step 8 Removing the pole base from the base unit,
requires the following allen wrench.
HV-15KV-WP,
HV-60KV-WP,
HW-10KV-WP,
HW-60KV-WP
HV-200KV-WP,
HW-100KV-WP,
HW-200KV-WP
5mm Allen wrench 6mm Allen wrench
Step 9 Wind the cable through the ferrite core two
times. Affix the cable to the rear cover using the
cable clamp.
Step 10 Connect the cable to the connnector. Close the
rear cover.
Step 11 Confirm the accuracy of the scale.