A&D Waterproof Digital Platform Scale HW-60KV-WP User Manual
Page 40
Page 38
HV-WP/HW-WP Series
13. Simple Batch Function
Step 6 Press the
MODE
switch to display the blinking HI (of
the final value).
Step 7 Set the final value using the following switches.
∧
switch
Selecting the number of a figure.
＜
switch
Selecting a figure.
Step 8 Press the
ENTER
switch to store the new parameter
and display the blinking OK (of preliminary value).
Step 9 Set the preliminary value using the following switches.
∧
switch
Selecting the number of a figure.
＜
switch
Selecting a figure.
Step 10 Press the
ENTER
switch to store the new parameter
and display the blinking LO (of zero band).
Step 11 Set the zero band using the following switches.
∧
switch
Selecting the number of a figure.
＜
switch
Selecting a figure.
Step 12 Press the
ENTER
switch to store the new parameter
and display the weighing mode.
13.2.
13.2.
13.2.
13.2. Operation and Performance (Examples)
Operation and Performance (Examples)
Operation and Performance (Examples)
Operation and Performance (Examples)
Step 1 Select the parameter
f6 8
of the function table.
Step 2 Set the parameters of the final value, preliminary value and zero band.
Step 3 The comparison result is always displayed.