A&D Waterproof Digital Platform Scale HW-60KV-WP User Manual
Page 36
Page 34
HV-WP/HW-WP Series
12. Full/Dribble Batch Function
12.1.
12.1.
12.1.
12.1. Preparation (Setting Parameters)
Preparation (Setting Parameters)
Preparation (Setting Parameters)
Preparation (Setting Parameters)
Step 1 Turn off the display.
Press the
ON/OFF
switch while the
ZERO
switch is
pressed and held. The function table is displayed.
Step 2 Press the
ENTER
switch to display an item of the
comparator function (
f6
).
Step 3 Select a parameter of the full/dribble batch function
(
f6 9
) with the
∧
switch.
Step 4 Press the
ENTER
switch to store the new parameter
and display an item of the full/dribble batch sub-
function (
f10
) .
Step 5 Select a parameter of the full/dribble batch sub-
function (
f10 0
~
f10 3
) with the
∧
switch.
Step 6 Press the
ENTER
switch to store the new parameter
Step 7 Press the
F
switch and the
ENTER
switch to exit from
the function table. Then the scale displays the
weighing mode.